SUDDEN WATER HEATER FAILURE: HOW TO DO RIGHT NOW

Sudden Water Heater Failure: How to Do Right Now

Sudden Water Heater Failure: How to Do Right Now

Blog Article

Call Today

Just how do you feel in relation to How to Troubleshoot and Repair an Electric Water Heater?


Hot Water Heater Repair
Lots of contemporary houses utilize an electric water heater for their heating system, due to its convenience and also ease of use. Nevertheless, similar to any other electric appliances, problems may occur with its usage, suddenly. It can be actually frustrating to get up to a cool shower rather than a warm one or having your bathroom with water that isn't hot sufficient and even too warm. Whatever the situation may be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a listing of possible options to your water heater issues. There are a variety of aspects that could create much of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it taken care of must not position too much of a problem if you follow these steps:

Examine Your Power Supply:


As fundamental as this may seem, it is really required. Without adequate power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it off and on once again. Replace any broken or worn-out fuse. Examine the home appliance with power after these changes to see if it's now working.

Examine the Heating Element in the Water Heater:


If it's not a power issue, after that try looking into your burner if it is still working. Test each of your heating elements to ensure the problem isn't with any of them. If any one of them is faulty, replace that component and afterwards check whether the warm water is back on.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't hot enough, you might need to inspect the temperature level setups on your top thermostat. Make sure the breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This must aid warm the water. Turn the circuit breaker back on as well as examine if the issue has been settled.

Call A Professional:


If after replacing all malfunctioning components and also resetting your temperature level, the water heater still isn't working, you may need to call an expert plumber for a professional opinion. The issue with your heating unit could be that the cold and hot faucets have actually been switched or it may be undersized for the quantity of hot water needed in your house. Whatever the instance might be, a professional plumber would assist fix the trouble.

Verdict


Water heater problems are not constantly major. Most of them are due to minor problems like a blown fuse or damaged burner. Changing the faulty parts ought to work. Nevertheless, if you are still incapable to address the trouble, give a call to your nearby plumber ahead to get it dealt with.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/


No Hot Water — Water Heater Repair

I hope you enjoyed our excerpt on What Would Cause My Electric Water Heater to Stop Working?. Thank you for spending some time to read our piece. Sharing is good. Helping people is fun. Thank you for your time spent reading it.


Avoid disaster, Call us!

Report this page